Features
- Wi-Fi HaLow Integration, Incorporates Wi-Fi HaLow ( IEEE 802.11ah ) technology to enable wireless communication devices.
- Compliant with Home Assistant device specifications
- Power supply ; supports dual power input modes :
- AC: 100V ~ 240V
- DC: 5V/1A
- Relay Control ; Features 3 built-in relays to control the on/o state of external devices with a rating of 10A@277VAX/30VDC
- PWM output; Provides 1 PWM pin for precise control of external devices, such as dimming lights or adjusting motor speed.
Standard
MCU
| MCU P/N | STM32U585CIT6Q |
| Internal Memory | 2 MB Flash memory, 786 KB SRAM |
Wi-Fi HaLow
| Antenna | Dipole Antenna |
| Compatibility | IEEE 802.11ah |
| Frequency Range/TW | US : 902-928 MHz EU : 863-865 MHz JP : NZ/AU : 915-928 MHz ( initial release supports US band only More regions coming soon ) |
| Channel bandwidth | US : 1 / 2 / 4 / 8 MHz EU : 1 MHz JP : 1 / 2 / 4 MHz NZ/AU : 1 / 2 / 4 / 8 MHz |
| Data Rate | Single-stream max data rate of 10 Mbps |
| Modulation | BPSK / QPSK / 16 QAM / 64 QAM |
| Transmit Power | US : 18 +/- 1 dBm@MS0, JP : 14 dBm@MS0, EU : 13 dBm@MS0, NZ/AU : 18 +/- 1 dBm@MS0 |
| Wireless Security | AES encryption engine Hardware support for SHA1 and SHA2 hash functions (SHA-256, SHA-384, SHA-512) WPA3 including protected management frames (PMF), Simultaneous Authentication of |
I/O Interaface
| Relay | NO : 15A 120VAC ( Tungsten ) NO : 10A 277VAC ( cURus ) NO : 10A 250VAC ( VDE ) |
| PWM | Voltage : 3.3V Frequency : 160 MHz (max) Duty Cycle : 0~100% Signal Load Capacity : The output current from 8 to 20 mA |
| USB | Type-C for configure |
Power Parameters
| Input Voltage | 100~240VAC or 5VDC/1A |
LED Indicator
| Power | STM32U585CIT6Q |
| HaLow | 2 MB Flash memory, 786 KB SRAM |
Physical Characteristics
| Dimensions (WxDxH) | 130 x 103 x 32 mm |
| Weight | w/o antenna : 365g w/ antenna : 390g |
| Relay | * Bistable relay (To ensure stable operation, a minimum interval of 100ms is recommended between the activation of each relay)* Monostable relay ( Option ) |
