1. Support 5G SA and NSA network

2. 5 x Gbps Ethernet port (1 x WAN + 3 x LAN)

3. Rich interfaces: 1 x 232, 1 x 485

4. 2 x SIM, auto switch over

5. Support WIFI 6. 802.11b/g/n/ac/ax

6. Support OpenVPN, Ipsec, GRE, PPTP, L2TP, Stunnel for security data transmission

7. Support Modbus, MQTT, HTTP and other IOT protocols

8. BLE to connect with BLE sensors, beacon

The Queclink WR310FEU dual SIM industrial cellular router is a high-end cellular router offering offers high-speed stable mobile connectivity for machine to machine (M2M) applications. Based on 5G NSA/SA technology, WR310FEU adopts high-performance 64-bit processor and embedded operating system design. APN/VPDN private network access and dual SIM backup design guarantee data transmission security and provide high-speed, reliable routing and data transmission capabilities. Equipped with 5 Gbps Ethernet ports, Wi-Fi 6, RS232/RS485 port, all of which make it can be widely used in telecommunications, finance, information media, branch office, smart city and smart factory.

Ceres::Template.singleItemTechnicalDataAttribute	Ceres::Template.singleItemTechnicalDataValue
Identificación de artículo	103544
Estado
Modelo	WR310FEU
Fabricante	Queclink
País de origen
Contenido	1 undefined
Peso	500 g

Specifications

Connectivity

Mobile	5G NR 5G NR NSA: n1/n3/n5/n7/n8/n20/n28/n38/n40/n41/n75/n76/n77/n78 5G NR SA: n1/n3/n5/n7/n8/n20/n28/n38/n40/n41/n75/n76/n77/n78
	LTE Cat 19 (Downlink) / Cat 18 (Uplink) LTE-FDD: B1/B3/B5/B7/B8/B20/B28/B32 LTE-TDD: B38/B40/B41/B42/B43
	WCDMA B1/B5/B8
WiFi	IEEE 802.11 a/b/g/n/ac/ax 2475 Mbps (5 GHz) and 591 Mbps (2.4 GHz) (MU-MIMO), Access Point (AP), Station (STA)
Ethernet	4 x RJ45 ports: 1 x WAN, 3 x LAN ports, 10/100/1000 Mbps, comply IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX
Network Protocol	TCP, UDP, IPv4, ICMP, NTP, DNS, HTTP, HTTPS, FTP, SSL v3, TLS, ARP, PPP, PPPoE, SSH, DHCP, Telnet, Modbus

Interfaces

Ethernet Ports	1 for WAN (10/100/1000Mbps) 3 for LAN (10/100/1000Mbps) Comply to IEEE 802.3, IEEE 802.3u standards, support auto MDI/MDIX
RS232 Serial Port	1 x RS232 (without RTS, CTS), 300-115200 baud rate
RS485 Serial Port	1 x RS485 half duplex (2 wires), 300-115200 baud rate
USB	1
SIM Slot	2
Mobile Antennas	4 x SMA for 5G
WiFi Antennas	3 x RP-SMA, WiFi 2.4G/5.G antenna
GNSS Antennas	1xSMA
Power Sockets	4-pin industrial DC power connector
Inputs/Outputs	1 x digital input, 1 x digital output in power connector
LED Indicators	Power, Net, WiFi, GNSS, mobile status, mobile signal strength 2 x WAN, 6 x LAN
Reset Button	1

GNSS Specifications

GNSS Type	All-in-One GNSS receiver
Sensitivity	Cold start: -146 dBm Reacquisition: -156 dBm Tracking: -147 dBm
Position Accuracy (CEP)	Autonomous: < 4.0m
TTFF (Open Sky)	Cold start: 35s average Warm start: 28s average Hot start: 2s average

General Specifications

Dimensions	130(W) x 100(D) x 45(H) mm (Exclude antenna connectors and mounting bracket)
Weight	552g
Operating Voltage	8 ~ 32V DC
Operating Temperature	– 30°C ~ 70°C (- 40°C ~ 85°C for storage)

Software

Operating System	OpenWrt based Linux OS
Alternative Link	Mobile, Wire, WiFi. Primary and backup link configured as requirement, auto load balance
WEB UI	HTTP, status, configuration, FW update, update FW from file, configuration load, configuration backup, FOTA, Update FW without losing current configuration
Connection Monitoring	Ping Reboot, LCP and ICMP for link inspection, Timing Task
SMS	Reboot, switch SIM, get status, restore factory setting

Security

Firewall	Firewall configuration via WEB UI, NAT
Attack Prevention	DDOS DMZ, ports scan
Wi-Fi Security	WPA-PSK, WPA2-PSK, AES
Access Control	Data connection port filter. Mac address filter.