1. 4× Gigabit RJ45 , 1× Gigabit RJ45 uplink, 1× SFP

2. Redundant 12-55V DC power feed for hot-swap protection

3. Ruggedized and compact design

4. Built-in 35mm DIN Rail clip

The WS100 industrial Ethernet switch features four 1Gbps RJ45 ports for device connectivity, plus a dedicated Gigabit uplink port and a Gigabit SFP slot for long-distance backhaul. The DIP switches instantly enable or disable port isolation mode and extended-range mode—no software configuration required. The compact metal case snaps onto standard 35 mm DIN Rail and draws power from a redundant 12–55 V DC terminal block(V1/V2) with hot-swap protection and plug-and-play integration into any industrial power bus.

Ceres::Template.singleItemTechnicalDataAttribute	Ceres::Template.singleItemTechnicalDataValue
Identificación de artículo	103801
Estado
Modelo	WS100
Fabricante	Queclink
País de origen
Contenido	1 undefined
Peso	500 g

Physical interfaces

Ethernet	5 x RJ45 ports, 10/100/1000Mbps
Fiber	1 x SFP port
Status LEDs	1 x Power status LED 5 x RJ45 status LEDs 1 x SFP status LED
DIP switch	V/D/E mode
Power connection	1 x 4 pin industrial terminal block with redundant V1 and V2 1 DC 2.1 jack The terminal block and the DC jack must not be powered simultaneously
Other	1 x grounding screw

Ethernet

RJ45	5 x RJ45 ports, 10/100/1000Mbps
Fiber	1 x SFP port
IEEE 802.3 series standards	802.3, 802.3u, 802.3ab, 802.3z, 802.3x

General Specifications

Casing material	Steel
Dimensions	120(W) x 87(D) x 30(H) mm
Weight	441g
Mainboard power consumption	4.96W(typical)
Mounting options	Desktop, wall mounting installation, DIN Rail installation
Operating Voltage	DC 12-55V
Operating Temperature	-40°C to 75°C
Operating humidity	10% to 90% non-condensing
Certification	CE, FCC, RoHS compliant

DIP function

VLAN mode(V)

Enabled: ports 1-4 are isolated from each other; only communicate with uplink ports 5-6;

Disabled: all ports share one broadcast domain.

Default mode(D)

Non-functional.

Extend mode(E)

Enabled: ports 1-4 drop to 10Mbps to extend the transmission distance up to 250 m;
Disabled: ports 1-4 support 10/100/1000 Mbps auto-negotiation and provide a transmission distance of up to 100 meters.

Switch parameters

Bandwidth	12Gbps
Packet forwarding rate	8.928Mpps
Packet buffer	1Mbit
MAC address table	2K
Jumbo frame	Supported
Forward mode	Store and forward